Carry Case
VigoBOX Case 1535
Designed with an ultra-lightweight polymer structure, but still extremely durable.
The protective carry case is waterproof, dustproof. It provides protection for a wide variety of equipment, it is available with foam, or without foam, or padded dividers. The case will lighten the load while protecting your products.
●
●
●
●
Rugged: IP67 & MIL-SPEC certified, automatic pressure equalization valve balances interior pressure, keeps water out
Easy to Go: Press and pull latches with quiet rolling stainless-steel bearing wheels.
Highly versatile: Modular design allows easy in-field upgrades and enhanced security.
Earth Friendly: GreenCircle® Certified for energy efficiency and eco-friendly refill ribbons.
Specification
-
Full-color with resin black and overlay panel, YMCKO*, 500 prints
-
Full-color with two resin black panels and overlay panel, YMCKOK*, 500 prints
-
Full-color with two resin black panels, YMCKK*, 500 prints
-
Full-color half-panel with resin black and overlay panel, YMCKO*, 850 prints
-
Full-color half-panel with two resin black panels and overlay panel, YMCKOK*, 650 prints
-
Full-color half-panel with two resin black panels and overlay panels, YMCKOKO*, 500 prints
-
Resin black, K*, 3000 prints
-
Resin white, W*, 2000 prints
-
6 seconds per card (K*); 16 seconds per card (YMCKO*);
-
24 seconds per card (YMCKOK*);
-
CR-80 (3.375"L x 2.125"W / 85.6 mm L x 54 mm W);
-
CR-79 (3.313"L x 2.063"W / 84.1 mm L x 52.4 mm W);
-
CR-80 edge-to-edge (3.36"L x 2.11"W / 85.3 mm L x 53.7 mm W);
-
CR-79 (3.3" L x 2.04" W / 83.8 mm L x 51.8 mm W);
-
PVC or polyester cards with polished PVC finish;
-
100% polyester cards (monochrome resin required); rewrite
Note: PVC cards are not recommended for use with the DTC1500 lamination module
-
Card cleaning roller integrated into ribbon cartridge;
-
cleaning roller is automatically replaced with each ribbon change;
USB 2.0, Standard Ethernet with internal print server
(Ethernet is optional on BIS-certified units)
-
Printer: 9.8"H x 18.7"W x 9.2"D / 249 mm H x 475 mm W x 234 mm D
-
Printer + lam: 18.9"H x 18.7"W x 9.2"D / 480 mm H x 475 mm W x 234 mm D
-
Printer: 11 lbs. / 5 Kg
-
Printer + lam: 20 lbs. / 9.1 Kg
-
Safety: UL 60950-2, CSA C22.2 (60950-07), and CE;
-
EMC: FCC Class A, CE (EN 55022 Class A, EN 55024), CCC, BSMI, KC
-
GreenCircle Certified card printer (base models only without encoders), refillable supply cartridges (ECO);
-
Rewrite technology - no ribbon required;
-
USB 2.0 interface for inline printing and encoding; dual-sided printing module; single- or dual-sided lamination module;
-
Smart card encoding modules (contact/contactless);
-
Magnetic stripe encoding module;
-
Printer cleaning kit;
-
Secure proprietary consumables system;
Print Method
Resolution
Colors
Print Ribbon Options
Print Speed
Accepted Standard Card Sizes
Print Area
Accepted Card Thickness
Accepted Card Types
Input Hopper Card Capacity
Output Hopper Card Capacity
Card Cleaning
Memory
Software Drivers
Interface
Operating Temperature
Humidity
Dimensions
Weight
Agency Listings
Supply Voltage
Supply Frequency
Environmental Features
Encoding Options (HID Encoders)
Options
Software
Display
Dye sublimation / resin thermal transfer
300 dpi (11.8 dots/mm) continuous tone
Up to 16.7 million / 256 shades per pixel
.009˝ - .040˝ / 9 mil - 40 mil / .229 mm - 1.016 mm
100 cards (.030˝ / .762 mm)
Up to 100 cards. (.030" / .762 mm)
32 MB RAM
Windows® 7 / 10 / 11 / Server 2012 / Server 2016 / Server 2019 / Server 2022
65° to 80° F / 18° to 27° C
20–80% non-condensing
100-240Vac, 50-60Hz, 1.6 Amps max
50 Hz / 60 Hz
Supported smart card and magnetic stripe technologies: 125 kHz (HID Prox) reader; 13.56 MHz (iCLASS Standard / SE / SR / Seos, MIFARE Classic, MIFARE Plus, MIFARE DESFire, MIFARE DESFire EV1/EV2, ISO 14443 A/B, ISO 15693) read/write encoder; contact smart card encoder reads from and writes to all ISO7816 1/2/3/4 memory and microprocessor smart cards (T=0, T=1) as well as synchronous cards; ISO magnetic stripe encoding, dual high- and low-coercivity, tracks 1, 2 and 3;
FARGO Workbench diagnostic utility with Color Assist spot-color matching
Color-changing status buttons
Related Products
Choose Biometric Enrollment Kit Modules for Your Project